Locks PR lock series
Lock locks of the PR series are applied at the exit of bulks from
razgruzitel of pneumatic installations, filters, cyclones and other
installations in which pressure differs from atmospheric and serve
for blockage of access in a razgruzitel of atmospheric air. Also
lock lock can be applied to release of loose products from bunkers
as the doser. The lock lock consists of the cylindrical case with
fixing flanges in the top and lower part. On lateral faces of the
case the covers equipped with bearing knots of the rotor mechanism
fasten. The rotor mechanism represents the reel which is rigidly
installed on a shaft, divided into several cavities which are
"pockets" for the given product. Making a revolution round its
pivot-center, cavities of a drum take particles of a product and
transport them down, carrying out unloading under the influence of
gravitation forces. Rotation of the rotor mechanism is carried out
from the electromechanical drive (motor reducer). Carrying out a
role of the unloading valve, the lock lock has tightness, the air
providing the minimum leak from the unloading bunker. In the steel
case there are special blowing-off openings for cleaning of locks
of a product,
stuck to walls. The purge is carried out at the expense of vacuum
or excessive pressure. At the request of the customer the lock lock
can be made in special explosion-proof execution of ATEH.
1. Tightness on all service life.
2. Portable bearing support.
3. The motor reducer from the known global manufacturer.
4. Low cost of operation.
5. Standard accessions and production on those. to a task.
Table of a technical characteristic of lock
locks of the PR series:
||Diameter of a rotor (mm)
||Power of an el.dvigatel (kW)
||Frequency of a rotor (rpm)
||Capacity of the working camera (l)
Country of manufacture:Ukraine
Information is up-to-date: 25.10.2017